Estimation of near surface soil moisture in a sloping terrain of a Himalayan watershed using ENVISAT ASAR multi‐incidence angle alternate polarisation data          下载免费PDF全文

Sameer Saran  Geert Sterk  Rajiv Nair  R. S. Chatterjee 《水文研究》2014,28(3):895-904

Soil moisture is one of the important input variables in hydrological and water erosion models. The extraction of information on near surface soil moisture from synthetic aperture radar (SAR) is well established mostly for flat terrain and using low incidence angle single polarisation data. The ENVISAT advanced SAR (ASAR) data available in multiple incidence angles and alternate polarisation modes were investigated in this study for soil moisture estimation in sloping terrain. The test site was Sitla Rao watershed in the Lesser Himalayas of northern India. Empirical models were developed to estimate near surface soil moisture in bare agricultural fields using alternate polarisation ASAR data. Both soil moisture and surface roughness field measurements were performed during the satellite passes. Backscatter from medium incidence angle (IS‐4) and vertical‐vertical (VV) polarisation signal is correlated better with volumetric soil moisture content compared to other incidence angles. The model parameters were further improved, and soil moisture estimation was refined by combining medium incidence angle (IS4) vertical‐horizontal polarisation response as another variable along with VV polarisation response. The effect of slope on the radar backscatter was minimized by incorporating local incidence angles derived from an ASTER DEM. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

The potential of Pléiades images with high angle of incidence for reconstructing the coastal cliff face in Normandy (France)     

《International Journal of Applied Earth Observation and Geoinformation》2020

To monitor chalk cliff face along the Normandy coast (NW France) which is prone to erosion, we tested the potential of cliff face 3D reconstruction using pairs of images with high angle of incidence at different dates from the agile Pléiades satellites. The verticality aspect of the cliff face brings difficulties in the 3D reconstruction process. Furthermore, the studied area is challenging mainly because the cliff face is north-oriented (shadow). Pléiades images were acquired over several days (multi-date stereoscopic method) with requested incidence angles until 40°. 3D reconstructions of the cliff face were compared using two software: ASP® and ERDAS IMAGINE®. Our results are twofold. Firstly, despite ASP® provides denser point clouds than ERDAS IMAGINE® (an average of 1.60 points/m² from 40° incidence angle stereoscopic pairs on the whole cliff face of Varengeville-sur-Mer against 0.77 points/m² respectively), ERDAS IMAGINE® provides more reliable point clouds than ASP® (precision assessment on the Varengeville-sur-Mer cliff face of 0.31 m ± 2.53 and 0.39 m ± 4.24 respectively), with a better spatial distribution over the cliff face and a better representation of the cliff face shape. Secondly, the quality of 3D reconstructions depends mostly on the amount of noise from raw images and on the shadow intensity on the cliff face (radiometric quality of images).  相似文献   

基于光谱角匹配算法的水体信息提取研究     

齐庆超  张小磊  金江峰  金玉玲 《测绘与空间地理信息》2016,(2):93-96

针对水体信息提取时,传统算法不能较好地解决山体阴影被误提为水体的问题,引入多用于高光谱数据处理的光谱角匹配算法,以Land-sat8 OLI(band1-band7)为数据源,以黄河小浪底水库周边区域为实验区,开展水体信息提取研究,结果显示:水体指数法和波段关系提取的结果中有大量的山体阴影信息,提取精度不超过30%,而光谱角匹配法提取结果受阴影的影响较小,提取精度在99%以上。  相似文献   

基于NGM(1,1,k,c)模型和改进切线角的危岩变形预测     

刘富有  陈鹏宇  余宏明 《测绘与空间地理信息》2016,(6):8-10

针对危岩变形预测问题,本文以非齐次指数序列的灰色模型(NGM)作为危岩变形预测的基本模型,通过对望霞危岩变形的分析结果显示,NGM(1,1,k,c)模型拟合效果明显优于GM(1,1)模型,说明危岩变形趋势更接近于非齐次指数序列。利用NGM(1,1,k,c)模型结合改进切线角可对危岩变形趋势进行分析预测,可作为危岩稳定性和发展趋势的评估依据。  相似文献   

国产机载LiDAR系统安置角误差检校方案研究   总被引：1，自引：0，他引：1  

谢劭峰  刘田龙 《测绘与空间地理信息》2016,(6):50-55

机载激光扫描仪(Light Detection And Ranging,LiDAR)系统是由多个子系统集成,其中,安置角误差是集成误差中最大的误差源,安置角误差检校的方法多种多样,高效率、高精度的检校方式还需要试验的支撑。本文对平差模型法和几何模型法进行了试验分析,试验结果很好地证明了不同方法的优越性,为机载LiDAR系统的安置角检校提供了参考。  相似文献   

城市点云的区域生长三角网构建方法     

李晶晶  范大昭  耿弘毅  纪松 《测绘科学技术学报》2016,(1):65-70

成熟的倾斜摄影测量及密集匹配技术可获取密集的城市点云,对点云进行三角网构建是真三维建模的关键技术之一。提出了基于区域生长的三角网构建方法,使用双约束条件提高点云的搜索效率,基于点边表数据结构进行网格生长,利用夹角约束和三角形孔洞修补优化网格。实验证明,该方法获取的三角网能够准确地表达楼体、桥状建筑等在内的城市实体,网格优化后的孔洞比例约为1‰并且该方法具有一定的抗噪能力。  相似文献   

Response of low‐angle dunes to variable flow          下载免费PDF全文

Megan L. Hendershot  Jeremy G. Venditti  Ryan W. Bradley  Ray A. Kostaschuk  Michael Church  Mead A. Allison 《Sedimentology》2016,63(3):743-760

Current understanding of bedform dynamics is largely based on field and laboratory observations of bedforms in steady flow environments. There are relatively few investigations of bedforms in flows dominated by unsteadiness associated with rapidly changing flows or tides. As a consequence, the ability to predict bedform response to variable flow is rudimentary. Using high‐resolution multibeam bathymetric data, this study explores the dynamics of a dune field developed by tidally modulated, fluvially dominated flow in the Fraser River Estuary, British Columbia, Canada. The dunes were dominantly low lee angle features characteristic of large, deep river channels. Data were collected over a field ca 1·0 km long and 0·5 km wide through a complete diurnal tidal cycle during the rising limb of the hydrograph immediately prior to peak freshet, yielding the most comprehensive characterization of low‐angle dunes ever reported. The data show that bedform height and lee angle slope respond to variable flow by declining as the tide ebbs, then increasing as the tide rises and the flow velocities decrease. Bedform lengths do not appear to respond to the changes in velocity caused by the tides. Changes in the bedform height and lee angle have a counterclockwise hysteresis with mean flow velocity, indicating that changes in the bedform geometry lag changes in the flow. The data reveal that lee angle slope responds directly to suspended sediment concentration, supporting previous speculation that low‐angle dune morphology is maintained by erosion of the dune stoss and crest at high flow, and deposition of that material in the dune trough.  相似文献   

Smoothing and re-roughening processes: The geometric evolution of a single fault zone     

《Journal of Structural Geology》2016

The geometry of a fault zone exerts a major control on earthquake rupture processes and source parameters. Observations previously compiled from multiple faults suggest that fault surface shape evolves with displacement, but the specific processes driving the evolution of fault geometry within a single fault zone are not well understood. Here, we characterize the deformation history and geometry of an extraordinarily well-exposed fault using maps of cross-sectional exposures constructed with the Structure from Motion photogrammetric method. The La Quinta Fault, located in southern California, experienced at least three phases of deformation. Multiple layers of ultracataclasite formed during the most recent phase. Crosscutting relations between the layers define the evolution of the structures and demonstrate that new layers formed successively during the deformation history. Wear processes such as grain plucking from one layer into a younger layer and truncation of asperities at layer edges indicate that the layers were slip zones and the contacts between them slip surfaces. Slip surfaces that were not reactivated or modified after they were abandoned exhibit self-affine geometry, preserving the fault roughness from different stages of faulting. Roughness varies little between surfaces, except the last slip zone to form in the fault, which is the smoothest. This layer contains a distinct mineral assemblage, indicating that the composition of the fault rock exerts a control on roughness. In contrast, the similar roughness of the older slip zones, which have comparable mineralogy but clearly crosscut one another, suggests that as the fault matured the roughness of the active slip surface stayed approximately constant. Wear processes affected these layers, so for roughness to stay constant the roughening and smoothing effects of fault slip must have been approximately balanced. These observations suggest fault surface evolution occurs by nucleation of new surfaces and wear by competing smoothing and re-roughening processes.  相似文献   

顾及拓扑与尖角的分类矢量数据分组压缩算法   总被引：1，自引：1，他引：0  

宋正祥  周晓光  陈律余 《测绘科学》2016,41(11):98-103

针对现有拆分重组法对存在复杂内环以及复杂相交岛屿多边形的分类矢量数据的压缩结果中包含裂缝、重叠及大量尖锐夹角的问题,提出了一种顾及拓扑一致性与尖角的分组压缩方法。依据分类矢量数据中多边形与多边形及其内环的相交关系对矢量矢量数据分组,以修正后拆分重组法结合直接分割法和间接分割法对分类矢量数据分组压缩,压缩结果中不存在裂缝与重叠现象,维护了分类矢量数据的拓扑一致性;通过取回尖角点前后被删除的点,解决了压缩结果中尖角过多的问题。以Landsat8遥感影像分类矢量数据实验验证了文章算法,并与直接分割法、间接分割法、拆分重组法进行了对比分析,验证了本文方法的有效性。  相似文献   

An experimental study on water entry of asymmetric wedges     

《Applied Ocean Research》2016

The aim of the paper is to provide an experimental reference for investigation of asymmetric water entry of wedges. Parameters of the study include initial deadrise angle, inclination angle and impact speed. Initial deadrise angles of the wedges were 20° and 30° with inclination angles ranging from 0° to 15° in 5° increments. Wedges were freely fallen from three different heights. Time histories of impact pressure and body acceleration were recorded. Sampling rate of measurements were set to 25 KHz. Main configuration of each test including mass of the wedge and water level were kept unchanged during all experiments. Additionally, several calibration tests were conducted to assess the repeatability and accuracy of the recorded data. The experimental results are compared with different entry theories and other available experiments. The comparison shows a reasonable agreement and indicates that the inclination angle can dramatically affect the impact pressure experienced by the wedges. Finally, the results show that the traditional asymmetric theories are not appropriate for all inclination angles.  相似文献